Intalling Agent 47's Retro Race Mirrors

Improve the look of your 2005+ Mustang by Installing Agent 47's Retro Race Mirrors

Tired of your stock bulky mirrors? Agent 47 (www.agentfortyseven.com) has developed their new Agent 47 Mirrors that capture the classic look of the original racing mirrors of the 1960?s. They come in flat black, and require painting. The mirrors use the stock mounting locations and connectors and can be used with the stock motor, which made for an easy installation.

Remove the driver’s side triangular plastic cover that the side mirror adjustment knob is located in. You can do this simply by pulling horizontally.	Disconnect the mirror motor wire harness.	Remove the three nuts holding the mirror in place.
Remove the mirror assembly.	Remove mirror by carefully pulling.	Get the correct Torx bit and unscrew the three torx screws attaching the mirror motor.
Gently pull out the motor and unclip the wiring from the back of the motor. The later motors that came along in 06 have an uncommon looking harness. It has a funky saddle type harness that has two clips on either side of the motor.	Remove the wiring harness from the stock housing.	Clip wiring back onto the mirror motor.
Thread the wire harness through the new mirror housing.	Screw the factory motor in place using the three stock torx screws.	Remove the stock weatherstripping foam from the stock mirror. Place this on the new A47 mirror housing and bolt it on the car using the stock nuts. Install both sides to this point and plug in the harnesses. Now check the motors for proper operation.
After everything is working properly you can clip on the actual mirror glass. It will be marked on the back with a D or P designating driver or passenger. Before you snap them on note that there is a thin wall. Make sure the cut out faces downward. It should not take too much force to snap these on. DO NOT FORCE IT! These are not meant to be repeatedly taken on and off so try to get it right the first time.	Reinstall the plastic interior covers.	Mirrors are completely installed!